26" x 11.95" x 0.85" 4140 Steel Hardened to 30 Rockwell C Fixture & Tooling Plate for Haas CM-1 Machines.
Fixture holes are 1.25" on center. Each fixturing hole is tapped 1/2x13 and bored for 0.500" pin. Plate contains 8 mounting holes for low profile SHCS and 360 fixture holes.
NOTE: Mounting hardware not included. We recomment QTY8 low profile
SHCS (McMaster P/N 92220A223) and t-slot nuts (McMaster P/N 94750A602). SMW does not recommend overhang on the X+ side of table due to enclosure clearances.