14" x 3.95" x 0.60" 6061 Aluminum Fixture & Tooling Plate for Sherline 5400 and 5410 mills. Plate comes with mounting slot to maximize compatibility and placement options.
Holes are 0.75" on center. Every hole is tapped 1/4"-20.
Note: bottom of fixture plate and top of machine table should be coated with a corrosion inhibitor to avoid galvanic corrosion from damaging either the fixture plate or the machine table. Plate must be periodically removed to inspect and re-apply coating. we recommend doing this every 3 months)
Note: Hardware not included. Designed for use with low profile socket head cap screws (SHCS) and T-Nuts according to your machine table. Please see drawing above for specific slot sizes to determine appropriate mounting hardware. All aluminum plates come with 6 adapter washers (McMaster P/N 91525a320) for machines with smaller t-nuts.