Rong Fu RF-40 6061 Aluminum Fixture Tooling Plate
NOTE: bottom of fixture plate and top of machine table should be coated with a corrosion inhibitor to avoid galvanic corrosion from damaging either the fixture plate or the machine table. Plate must be periodically removed to inspect and re-apply coating. we recommend doing this every 3 months)
Mounting hardware is customer supplied. We recommend QTY8 low profile SHCS (McMaster P/N 92220a262) and QTY8 T-slot nuts (McMaster P/N 94750a585). Product images are representative, and may not show this specific mill.
We Also Recommend