Wabeco V4 6061 Aluminum Fixture Tooling Plate
34" x 11.95" x 0.95" 6061 Aluminum Fixture & Tooling Plate for Wabeco V4 machines.
Holes are 1.25" on center. Every hole is tapped 1/2x13 and reamed for 0.500" pin.
Includes low profile screws and t-nuts to mount fixture plate to machine table.
NOTE: bottom of fixture plate and top of machine table should be coated with a corrosion inhibitor to avoid galvanic corrosion from damaging either the fixture plate or the machine table. Plate must be periodically removed to inspect and re-apply coating. we recommend doing this every 3 months)
Product images represent the correct plate size & product, but may not reflect your machine.
We Also Recommend
