Fixture & tooling plate for various TRAK mills, including (but not limited to) the K3, K4, DPM RX2, DPM SX2, and DPM RX3. Compatible with any machine having a t-slot center distance of 63-65mm (2.48-2.56in) and 3+ t-slots. Note: fixture plate is centered on table. Please ensure any overhang is acceptable if your table is not wider than 12".
Measurements: 34" x 12" x 0.95"
Plate mounts to table with 8 low profile SHCS. Mounting screws and t-nuts are available as a separate option. (default hardware kit for this plate is a 5/8" (16mm) t-slot kit. View other sizes here if your table does not match).
Plate has 463 fixture holes that are spaced 1.25" on-center. Each fixture hole is tapped 1/2-13 UNC and bored for 0.500" pin.
Available in 4140 steel, anodized 7075 aluminum, or 6061 aluminum. Click here to see the benefits of each.
| Variant | Weight (lbs) |
|---|
Low-profile socket head cap screws and t-nuts are available separately. No additional installation hardware is required.
When 6061 aluminum SMW Fixture Plates are installed on a non-aluminum surface such as a steel machine table these plates must be used with a galvanic corrosion inhibitor (e.g. dielectric spark plug grease) and be removed frequently to inspect for condition and/or re-apply the corrosion inhibitor.
Installation Instructions
For information and video demos on how to setup, install, and other tips and tricks, visit the FAQ page!
| Variant | QTY |
|---|---|
| 4140 Steel | 1 |
| 7075 Ano. Aluminum | 0 |
| 6061 Aluminum | 0 |
In stock plates are typically ready to ship within one business day (other items in order may affect shipping time).
Out-of-stock bare aluminum and steel plates have a lead time of 3-4 weeks (steel fixture plate sets carry a 4-5 week lead time), while anodized 7075 fixture plates are 4-6 weeks. Please contact us for specific lead times or to inquire about time-critical orders.
This fixture plate ships via standard parcel shipping (FedEx Ground or USPS Priority). For questions about additional shipping methods, please contact us.
