14" x 9.45" x 0.70" 6061 Aluminum Fixture & Tooling Plate for Makera Carvera Desktop CNC Machines.
These will be available for purchase soon, please email us if you would like a notification for when they are in stock!
This plate retains the stock mounting locations and hardware for the Makera L-Brackets and 4th Axis by passing the pins and hardware through the fixture plate and into the existing bed standoffs. Plate is engraved to denote these locations.
INCH PLATES: Holes are 0.75" on center. Every hole is tapped 1/4"-20.
METRIC PLATES: Holes are 20mm on center. Every hole is tapped M6.
This plate replaces the MDF spoilboard. You will need to remove most of the standoffs from the Carvera bed (12 standoffs and all 4mm locating pin posts can be left in place for mounting the Makera L-Brackets and 4th Axis - see 3rd photo). Plate mounts with existing SHCS from the spoilboard.
NOTE: If you are machining conductive materials, you must cover the circuit board contacts before installing the fixture plate. Otherwise metal chips may fall through the fixture plate holes and cause a short. We recommend covering with hot glue, electrical tape, or installing set screws in the fixture plate to block the holes above the circuit board. You can also 3D-print our fixture plate plugs here.
| Variant | Weight (lbs) |
|---|---|
| 1/4" | 8.0 |
| M6 | 7.9 |
This plate reuses existing mounting hardware, so no additional items are needed for installation. NOTE: If you are machining conductive materials, you must cover the circuit board contacts before installing the fixture plate. Otherwise metal chips may fall through the fixture plate holes and cause a short. We recommend covering with hot glue, electrical tape, or installing set screws in the fixture plate to block the holes above the circuit board.
| Variant | QTY |
|---|---|
| 1/4" | 5 |
| M6 | 1 |
In stock plates are typically ready to ship within one business day (other items in order may affect shipping time).
Out-of-stock bare aluminum plates have a lead time of 7-14 business days, while anodized 7075 and steel fixture plates are 4-6 weeks (steel fixture plate sets carry a 6-8 week lead time.) Please contact us for specific lead times or to inquire about time-critical orders.
This fixture plate ships via standard parcel shipping (FedEx Ground or USPS Priority). For questions about additional shipping methods, please contact us.
