34" x 12" Fixture & Tooling Plate for Tormach 770® available in 4140 Steel Hardened to 30 Rockwell C, 7075 anodized aluminum, or 6061 Aluminum. Click here to see the benefits of each. Steel plates are 0.85" thick, aluminum plates are 0.95" thick. Plate is compatible with all Tormach 770 machines (including Series 3, 770M and 770MX).
Plate is intended to allow for more fixturing locations outside of the work envelope. This allows for mounting accessories such as the RapidTurn or microARC off of the machine table, maintaining more usable travel in the X direction.
Holes are 1.25" on center. Every hole is tapped 1/2x13 and reamed for 0.500" pin.
Includes low profile screws and t-nuts to mount fixture plate to machine table.
NOTE: when bare aluminum plates are installed on a non-aluminum surface such as a bare machine table these plates must be used with a galvanic corrosion inhibitor (e.g. dielectric spark plug grease) and be removed periodically to inspect for condition and/or re-apply the corrosion inhibitor. We recommend doing this every three months.