SMW Modular Vise (Gen3)
$ 339.99
  • SMW Modular Vise (Gen3)
SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3) SMW Modular Vise (Gen3)

SMW Modular Vise (Gen3)
$ 339.99
$ 339.99
1

Introducing the Gen3 Mod Vise - a versatile, low profile workholding and fixturing system for Saunders Machine Works 1/2" and M12 Fixture Plates! Our two-piece vise design allows for clamping parts of any size while maintaining a much lower profile than standard machine vises. (Note: M12 / Metric vises are not compatible with 1/2-13 tapped fixture plates and require an M12 on 30mm centers pattern.)

Product Specs:

  • Machined from 4140 steel
  • Built-in 1.00" (25.4mm) parallels for use with jaw inserts (included with Gen3 vises!) or SMW Castle Grips.
  • Built-in alignment pins in the fixed-side vise base, eliminating the need to tram the vise when installed on an SMW fixture plate. These diamond-style pins allow the fixed-side base to repeatably locate and tram the jaw position.
  • Uses tapered M12 clamping bolts to apply up to 3,200 lbf [14 kN] of clamping force (on par with traditional screw-style 4" machine vises)

See FAQ here for the differences between the Gen2 and Gen3 Modular Vise.

Contents Include:

  • Single Station Vise
    • (1) Gen3 Mod Vise Adjustable Base & Top Jaw
    • (1) Gen3 Mod Vise Fixed Base & Top Jaw
    • (2) Smooth Jaw Insert Bar
    • (1) Hardware Kit for securing to SMW Fixture Plate
  • Dual Station Vise
    • (2) Gen3 Mod Vise Adjustable Base & Top Jaw
    • (1) Gen3 Mod Vise Dual Station Fixed Base
    • (4) Smooth Jaw Insert Bar
    • (1) Hardware Kit for securing to SMW Fixture Plate

Related Products & Accessories:


    On-Table Weights
    Variant Weight (lbs)
    Single Station / Inch (1/2") 6.6
    Single Station / Metric (M12) 6.6
    Dual Station / Inch (1/2") 9.3
    Dual Station / Metric (M12) 9.3

    1/2" vises require a 1/4" hex key for the fixture plate mounting bolts and an 8mm (or 5/16") hex key for actuating the clamping bolts. M12 vises require an 8mm hex key for both the mounting and clamping bolts. A torque wrench with hex bit sockets is optional, but recommended, over standard hex keys.


    Solid Model (.STEP)


    Fusion 360 CAM Sample (.F3D)


    Gen3 Modular Vise Dimensions & Tolerances (.PDF)