34" x 11.95" Fixture & Tooling Plate for SYIL X7 machines, available in 4140 Steel Hardened to 30 Rockwell C, 7075 Anodized Aluminum, or 6061 Aluminum. Click here to see the benefits of each. Steel plates are 0.85" thick, aluminum plates are 0.95" thick. Plate is compatible with multiple generations of machine, please see drawing to confirm for your X7.
Holes are 1.25" on center. Every hole is tapped 1/2x13 and reamed for 0.500" pin. Plate contains 349 reamed and tapped fixturing holes and 8 mounting holes for low profile SHCS.
NOTE: when bare aluminum plates are installed on a non-aluminum surface such as a bare machine table these plates must be used with a galvanic corrosion inhibitor (e.g. dielectric spark plug grease) and be removed periodically to inspect for condition and/or re-apply the corrosion inhibitor. We recommend doing this every three months.
Mounting hardware not included with plate. QTY8 Low Profile SHCS and T-slot nuts are recommended, see drawing for mounting hole dimensions and verify appropriate T-slot nuts for your table as slot sizes may differ across X7 machine generations.