Makera Carvera Fixture Tooling Plate

Makera Carvera Fixture Tooling Plate

Regular price $ 249.99 USD
Sale price $ 249.99 USD Regular price
Sale Sold out
Hole Pattern
Our P/N: S1889
Accessory Kits

4 in stock

Product Specifications

14" x 9.45" x 0.70" 6061 Aluminum Fixture & Tooling Plate for Makera Carvera Desktop CNC Machines. Not compatible with the Carvera Air.

This plate retains the stock mounting locations and hardware for the Makera L-Brackets and 4th Axis by passing the pins and hardware through the fixture plate and into the existing bed standoffs. Plate is engraved to denote these locations.

INCH PLATES: Holes are 0.75" on center.  Every hole is tapped 1/4"-20.

METRIC PLATES: Holes are 20mm on center.  Every hole is tapped M6.

This plate replaces the MDF spoilboard. You will need to remove most of the standoffs from the Carvera bed (12 standoffs and all 4mm locating pin posts can be left in place for mounting the Makera L-Brackets and 4th Axis - see 3rd photo). Plate mounts with existing SHCS from the spoilboard.

NOTE: If you are machining conductive materials, you must cover the circuit board contacts before installing the fixture plate. Otherwise metal chips may fall through the fixture plate holes and cause a short. We recommend covering with hot glue, electrical tape, or installing set screws in the fixture plate to block the holes above the circuit board. You can also 3D-print our fixture plate plugs here.

On-Table Weights
Variant Weight
1/4" 8.0lbs [3.6kg]
M6 7.9lbs [3.6kg]

Lead Time

In stock plates are typically ready to ship within one business day (other items in order may affect shipping time).

Out-of-Stock Lead Times
Material Single Plate Set of 2-3 Plates Set of 4+ Plates
4140 Steel 7-8 weeks 8-9 weeks 9-11 weeks
7075 Aluminum (Anodized) 7-8 weeks 7-8 weeks 7-8 weeks
6061 Aluminum 4-5 weeks 4-5 weeks --

Please contact us for specific lead times or to inquire about time-critical orders.

Shipping

This fixture plate ships via standard parcel shipping (FedEx Ground or USPS Priority). For questions about additional shipping methods, please contact us.

This plate reuses existing mounting hardware, so no additional items are needed for installation. NOTE: If you are machining conductive materials, you must cover the circuit board contacts before installing the fixture plate. Otherwise metal chips may fall through the fixture plate holes and cause a short. We recommend covering with hot glue, electrical tape, or installing set screws in the fixture plate to block the holes above the circuit board.

For fixture plate installation instructions see our Knowledge Base article here.

View full details

Customer Reviews

Overall rating: 5.0 / 5 from 8 reviews.

Customer photo review of Makera Carvera Fixture Tooling Plate

The addition to the SMW fixture plate/bed has allowed me to increase my productivity, quality, repeatability, and flexibility. These are an incredible value too. Every Carvera owner should have one. Thank you for making these products.

Makera Carvera Fixture Tooling Plate

Customer photo review of Makera Carvera Fixture Tooling Plate

Fantastic upgrade to the Carvera to make it significantly better at machining metals. Primarily, it allows you to use coolant oils that would otherwise get absorbed into the stock MDF bed and warp it badly. Just note that the smaller MDF spoilboards that come with the Carvera don't really work with this new bed since the hole patterns don't align. Additionally, the modular vices are great for metals but warp thin plastic sheets when it grips them so you can't use the vices for those.

Makera Carvera Fixture Tooling Plate

Second Carvera meant second SMW fixture plate. I'll never have a CNC without one. My first SMW fixture plate was on a HAAS VF4 and it's even more useful on the tiny machines where planning space is critical and low profile vise and fixturing is everything.

Makera Carvera Fixture Tooling Plate

love the fixture plate, for some reason the STEP file on your web site isn't importing into fusion with the hole pattern in tact.

Makera Carvera Fixture Tooling Plate

Store owner replied: Thanks Brinton! Glad you're liking the fixture plate - the STEP file will import with *both* the 1/4" and M6 versions of the plate which can make the hole pattern look a little funky on import. Once you remove the model you don't need it should be okay, but shoot us an email at support@saundersmachineworks.com if you're still having issues and we'll get you taken care of.

Fantastic product! It is high quality and precise. It is easy to install and tram up. In combination with the hobby modular vise, it has completely transformed the little Carvera machine.

Makera Carvera Fixture Tooling Plate